GMC 1530/2040/2060 gantry processing center 2

*Product model*		*unit*	*GMC1530r1*	*GMC1530r2*	*GMC2040r2*	*GMC2060r2*
Table size		mm	1500×3000	1500×3000	2000×4000	2000×6000
The distance between the pillars		mm	2100	2100	2600	2600
Maximum load allowed		Kg	10000	10000	20000	25000
T-slot size		mm×個	28×7	28×7	28×11	28×11
Maximum travel of table -- X axis		mm	3600	3600	4200	6200
Maximum travel of sliding seat -- - Y axis		mm	2700	2700	3200	3200
Maximum stroke of pillow - Z axis		mm	800	1000（1250choose）	1000（1250choose）	1000（1250choose）
C axis			5° x 72	5° x 72	5° x 72	5° x 72
Distance from vertical shaft end to work table		mm	200-1000	200-1200	200-1200	200-1200
Taper hole (7:24)			ISO 50	ISO 50	ISO 50	ISO No50
RPM range		r/min	10～3000	10～2000	10～2000	10～2000
Maximum output torque		N·m	1321/1821	1359/1873	1359/1873	1359/1873
Motor power of spindle		kW	37/51	37/51	37/51	37/51
Ram section		mm	350 ×350	420 ×470	420 ×470	420 ×470
Cutting feed speed range		mm/min	1～5000	1～5000	1～5000	1～5000
Fast moving	X-axis	m/min	13	13	13	10
	Y-axis		13	13	13	13
	Z-axis		10	10	10	10
capacity		A	40,60	40,60	40,60	40,60
Blade replacement			any	any	any	any
Maximum blade diameter	With a knife	mm	φ125	φ125	φ125	φ125
Maximum blade diameter	Adjacent empty knife	mm	φ250	φ250	φ250	φ250
maximal length		mm	400	400	400	400
Maximum weight		kg	20	20	20	20
Tool change time (knife to knife)			5.5	5.5	5.5	5.5
Execution standard：GB/T19362.1-2003	x-axis	mm	0.03（0.023 With grating ruler）	0.03（0.023 With grating ruler）	0.032（0.025 With grating ruler）	0.04（0.03 With grating ruler）
	Y-axis		0.03（0.023 With grating ruler）	0.03（0.023 With grating ruler）	0.032（0.025 With grating ruler）	0.032（0.025 With grating ruler）
	Z-axis		0.025	0.025（0.02 With grating ruler）	0.025（0.02 With grating ruler）	0.025（0.02 With grating ruler）
Execution standard：GB/T19362.1-2003	X-axis	mm	0.02	0.02（0.016 With grating ruler）	0.022（0.016 With grating ruler）	0.025（0.02 With grating ruler）
	Y-axis		0.02（0.016 With grating ruler）	0.02（0.016 With grating ruler）	0.022（0.016 With grating ruler）	0.022（0.02 With grating ruler）
	Z-axis		0.01（0.016 With grating ruler）	0.01（0.008 With grating ruler）	0.01（0.008 With grating ruler）	0.01（0.016 With grating ruler）
Total electrical capacity		KVA	110	110	110	110
Numerical control system			Siemens 840D	Siemens 840D	Siemens 840D	Siemens 840D

>> GMC1530/2040/Machine tool accessories 2060

Send Inquiry

Please feel free to contact with us at sales@cnshengyuan.cn, info@cnshengyuan.cn or filling up an enquiry form instructed at the bottom, You will get an effective response within 24 hours from Shengyuan sales representative.
Thanks for your valued time with interest!

Subject:
*Name:
*E-mail:
Company Name:
Tel:
Fax:
Country:
Message: